GreenLinePumps

A small irrigation or waste pump that direct couples to the tractor p.t.o. spline.
The compact and portable pump has been designed for a wide range of applications
including water transfer, irrigation, frost protection, tanker filling or for use as an
emergency back-up pump.
Included with the pump is a footvalve and strainer with hosetail, a 3" threaded suction
hosetail and a 2" delivery elbow.

Even with these fittings the total weight of the pump is less than 40 lbs..
Flow = 25-145 gpm, Pressure = 54-85 psi, Max. HP = 7.5

The 'T' Series pumps are designed for tractor p.t.o. drives and are ideally suited for a
wide range of irrigation applications including the high-heads normally required for
irrigation machines.

These pumps have a unique water circulation system to ensure the gearbox remains
cool at all times. -Even after prolonged operation in difficult environments, the cooling
system provides safety and an extended life of the gearing.

Flow = 60-1000 gpm, Pressure = 75-182 psi, HP = 10-97

The 'MB' Series low-head pumps are suitable for flows up to 4400 gpm, and also available
are flanged and bareshaft pumps suitable for electric or diesel driven pumping sets.

These pumps have a unique water circulation cooling system to ensure the gearbox
remains cool at all times - even after prolonged operation.

This allows for greater safety and for extended life of the gearing when the pump is to be
operated in difficult environmental conditions.

Flow = 800-4400 gpm, Pressure = 20-37 psi, HP = 32-56

The 'SK' Series pumps are designed for electric and diesel drives and are ideally suited for
a wide range of irrigation applications including the high-heads normally required for
irrigation machines.

These pumps have a unique water circulation cooling system to ensure the gearbox remains
cool at all times - even after prolonged operation.

This allows for greater safety and for extended life of the gearing, even if the pump is to be
operated in difficult environmental conditions.

Flow = 200-1000 gpm, HP = 42-170

The 'TK' Series pumps are designed for tractor p.t.o. drives and are ideally suited for a
wide range of irrigation applications including the high-heads normally required for
irrigation machines.

These pumps have a unique water circulation cooling system to ensure the gearbox
remains cool at all times - even after prolonged operation.

Flow = 200-1000 gpm, HP = 42-170

The 'F' Series pumps are designed for coupling to SAE mount flywheel diesel engines and
are ideally suited for a wide range of irrigation applications including irrigation travelers,
drip, pivots, sprinkler lines and flood work.

Bladed diffuser rings convey impeller flow allowing high hydraulic efficiency with
constant performance.
All the cast parts, including impellers, are made of high quality fine grain cast iron.
The pump is equipped with fixed wear-rings which can easily be replaced to restore
original sealing efficiency.
Each pump has a robust support which houses the transmission shaft guided by
bearings able to withstand radial and axial thrusts. These bearings can be either oil bath
(S3 version) or watertight (ST3 version).

Flow = 100-2750 gpm, Pressure = 31-229 psi, HP = 13-135
ALL MODELS AVAILABLE IN PEDESTAL MOUNT VERSIONS