Green Line Pumps

"TOF-50" Series
A small irrigation or waste pump that direct couples to the tractor p.t.o. spline.
The compact and portable pump has been designed for a wide range of applications
including water transfer, irrigation, frost protection, tanker filling or just as an
emergency back up pump.
Included with the pump is a footvalve and strainer with hosetail, a 3" threaded suction
hosetail and a 2" delivery elbow.
Even with these fittings the total weight of the pump is less than 40 lbs..
Flow = 25-145 gpm, Pressure = 54-85 psi, Max. HP = 7.5

"T" Series
The 'T' Series pumps are designed for tractor p.t.o. drives and are ideally suited foe a
wide range of irrigation applications including the high-heads normally required for
irrigation machines.
These pumps have a unique water circulation cooling system to ensure the gearbox
remains cool at all times - even after prolonged operation. This allows for graeter
safety and for extended life of the gearing, even if the pump is to be operated in
difficult environmental conditions.
Flow = 60-1000 gpm, Pressure = 75-182 psi, HP = 10-97

"MB" Series Low-Head P.T.O.
The 'MB' Series low-head pumps are suitable for flows up to 4400 gpm, and also
available are flanged and bareshaft pumps suitable for electric or diesel driven
pumping sets.
These pumps have a unique water circulation cooling system to ensure the gearbox
remains cool at all times - even after prolonged operation. This allows for greater
safety and for extended life of the gearing, even if the pump is to be operated in
difficult environmental conditions.
Flow = 800-4400 gpm, Pressure = 20-37 psi, HP = 32-56

"SK" Series High Pressure Horizontal Multistage
The 'SK' Series pumps are designed for electric and diesel drives and are ideally
suited for a wide range of irrigation applications including the high-heads normally
required for irrigation machines.
These pumps have a unique water circulation cooling system to ensure the gearbox
remains cool at all times - even after prolonged operation. This allows for greater
safety and for extended life of the gearing, even if the pump is to be operated in
difficult environmental conditions.

"TK" Series High-Head P.T.O. Multistage
The 'SK' Series pumps are designed for tractor p.t.o. drives and are ideally suited for
a wide range of irrigation applications including the high-heads normally required for
irrigation machines.
These pumps have a unique water circulation cooling system to ensure the gearbox
remains cool at all times - even after prolonged operation.

"F" Series Low/Medium/High-Head Pumps
The 'F' Series pumps are designed for coupling to SAE mount flywheel diesel engines
and are ideally suited for a wide range of irrigation applications covering irrigation
travelers, drip, pivots, sprinkler lines and flood work.

Bladed diffuser rings convey impeller flow allowing high hydraulic efficiency with
constant performances.

All the cast parts, including impellers, are made of high quality fine grain cast iron.

The pump is equipped with fixed wear-rings which can easily be replaced to restore
original sealing efficiency.

Each pump has a robust support which houses the transmission shaft guided by
bearings able to withstand radial and axial thrusts. These bearings can be either oil
bath (S3 version) or watertight (ST3 version).

Flow = 100-2750 gpm, Pressure = 31-229 psi, HP = 13-135
ALL MODELS AVAILABLE IN PEDESTAL MOUNT VERSIONS