|
|
"SL" Series The 'SL' Series pumps are suitable for pumping animal dejections in installations requiring high operating pressures; besides they can be used successfully in irrigation systems too. These pumps can be fitted with a chopper cone, whose rotating knives are suitable to triturate solids, to pump slurry with fibers in suspension such as straw, leaves etc.. 'SL' pumps can be coupled to diesel engines and electric motors by flexible coupling or pulley. Flow = 50-1000 gpm, Pressure = 65-184 psi, HP = 20-94 |
"TL" Series The 'TL' Series pumps are suitable for pumping animal dejections in installations requiring high operating pressures; besides they can be used successfully in irrigation systems too. These pumps can be fitted with a chopper cone, whose rotating knives are suitable to triturate solids, to pump slurry with fibers in suspension such as straw, leaves, hay or other difficult residuals, enabling it to handle virtually any waste products requiring chopping. Thanks to the oil bath overgear and various transmission ratios available, these pumps can be coupled to a tractor p.t.o. from 540 to 1000 RPM. Flow = 50-1000 gpm, Pressure = 65-184 psi, HP = 20-94 |
"TLK" Series The 'TL' Series sewage pumps have now been extended with the new 'TLK' Series specifically manufactured for pumping animal dejections containing solids in suspension These pumps are equipped with a new "chopper" system able to reduce solid content and crumble fibers such as straw, leaves, forage residuals etc. contained in the pumped liquid. The new chopper not only avoids the pump and pipes from clogging but even allows sewagws to be pumped at high operative pressures. Flow = 50-1000 gpm, Pressure = 65-184 psi, HP = 20-94 |
"FL" Series The 'FL' Series pumps are suitable for pumping sewage and animal dejections in installations requiring high operating pressures; besides they can be used successfully in irrigation systems. These pumps can be fitted with a chopper cone, whose rotating knives are suitable to triturate solids, to pump slurry with fibers in suspension such as straw, forage residuals etc.. The wide dimensioned support personalizes the pump design. The 'FL' series pumps can be flanged directly onto diesel engines fitted with SAE housings. While the shaft is driven by oil bath bearings. The open impeller with revelant wear plate with pin conveyor and the mechanical seal complete with an auxiliary lubrication system characterizes the 'FL' pump. Flow = 50-1000 gpm, Pressure = 65-184 psi, HP = 20-94 |
CHOPPER CONE Accessory to be fitted on the inlet of pump series SL-TL-FL for pumping sewage with fibers in suspension. |
IMPELLER-WEAR PLATE The particular shape of the impeller and wear plate equipped with pin conveyor facilitate the flow in the hydraulic channels and protect these against clogging. |
SEAL LUBRICATION Mechanical seal with silicium carbide contact faces, are permanently lubricated by liquid from an external bowl. |
AgriBusiness International, Inc. P.O. Box 909 Villa Rica, Georgia 30180 Phone: 770-459-4401 Fax: 770-459-6877 |
