WastePumps

A wide range of centrifugal pumps designed for waste water with solids in suspension. Suitable for industrial, civil and agricultural
applications. These extremely efficient pumps are manufactured from heavy duty materials and can be supplied with electric
motors, diesel engines or can be operated with a tractor pto.

The 'TL' Series pumps are suitable for pumping animal waste or poultry waste in installations with a pressure requirement
suitable for sprinkler dispersal and are also great for irrigation. These pumps can be fitted with a chopper cone equiped with
rotating knives suitable for chopping solids, they are ideal to pump slurry with fibers in suspension such as straw and leaves
and are capable of handling virtually any waste products that require chopping. Thanks to the oil bath overgear and various
transmission ratios available, these pumps can be coupled to a tractor p.t.o. from 540 to 1000 RPM

Flow = 50-1000 gpm, Pressure = 65-184 psi, HP = 20-94

The 'TLK' Series specifically manufactured for pumping animal waste containing solids in suspension.
These pumps are equipped with a new chopper system able to reduce solid content and crumble fibers such as straw, leaves,
forage residuals etc. contained in the pumped liquid. The new chopper not only avoids the pump and pipes from clogging but
even allows sewage to be pumped at high operative pressures.

Flow = 50-1000 gpm, Pressure = 65-184 psi, HP = 20-94

The FL (flanged mount) and SL (pedestal mount) series pumps are suitable for pumping animal or poultry waste in
installations with a pressure requirement suitable for use with sprinklers. The pumps can be fitted with an optional chopper
cone with rotating knives to pump slurry with fibers and solids in suspension such as straw, forage residuals, etc..
The oversized support and bearings enables the FL series pump to be mounted directly to an SAE flywheel and engine
housing with minimal labor, while the SL series can be fitted with a simple driveline for connection to electric motors or
diesel engines. These pumps have a standard open-vane impeller, adjustable wear plates and mechanical seals with an
auxiliary lubricating system for long life.

Flow = 50-1000 gpm, Pressure = 65-184 psi, HP = 20-94

Thanks to the forked splined nut and stud bolts,
the installation of the chopper cone is quite simple.

The construction materials, shape of the sharp
knives and the perfect hydraulic design of the
chopper cone ensure the pump functions without
losses of capacity, cavitation noise and with low
power absorption